Why do qc delays fade too quickly in terms of volume?

[DiffractionCircuit]

Related topic and feature request, though these don’t exactly address OP’s original issue:

Why is Delay mix not equal at 50%?

After seeing more posts regarding this issue I realized my initial response was in regards to how I typically use a delay in my signal chain rather than the OP’s thoughts as to how the ‘Mix’ parameter should work. I often run my delays in serial, somewhere after the amp/cab. IMHO the following represents the best, and by best, I mean most predictable and most intuitive manner for the ‘Mix’ control to work: The levels of the source and the delayed signals should be equal at 50%. As you move pas…

[Option to] Make delay mix equal at 50%

“By popular demand!” In all delay blocks: Make the delay’s signal volume equal to the dry signal at the 50% mark. Delay signal only at the 100% mark. Let us TOGGLE this feature. The current method of having delay and dry signals equal to each other at the ~75-85% mark does not make sense for a lot of users. A 50% equal mix gives users a more predictable linear operation. Users should be able to toggle this feature on or off from the Settings menu. Previous existing threads:

EDIT: Let me also say that I use external effects for my delays (Boss RE-2 + DD-500), so I don’t have any particular opinion on the QC’s delays.