Make Delay mix work again please

[DiffractionCircuit]

It’s not new. There was so much discussion about delay mix not being equal at 50% that I made a feature request for it:

Why is Delay mix not equal at 50%?

I’ve been trying to use a delay with the mix set so the original note and delayed note (feedback very low so only 1 repeat) are the same volume. It makes sense to me that this would happen at either 60% mix (ie the original note, and the repeated note are balanced at 50/50 ) or 100% (ie the volume of the repeated note is 100% of the volume of the original note, or in other words, the same volume) In concept - and based on my experience with other multi fx units - both of these have the same re…

[Option to] Make delay mix equal at 50%

“By popular demand!” In all delay blocks: Make the delay’s signal volume equal to the dry signal at the 50% mark. Delay signal only at the 100% mark. Let us TOGGLE this feature. The current method of having delay and dry signals equal to each other at the ~75-85% mark does not make sense for a lot of users. A 50% equal mix gives users a more predictable linear operation. Users should be able to toggle this feature on or off from the Settings menu. Previous existing threads: