Feature request: Semi-permanent Volume Meter Views

Hello from the south of France “the Riviera”:
I am an “Old School” guitarist in a “Cover’s Band Rock Pop”
At home, I prepare my setlist for live rehearsals.
In order not to waste time, here is how I proceed:
I work exclusively with a lot of Scenes so as not to have any sound cuts.
– (I may not have understood everything about Hybrid mode because it is not yet my priority.)

The problem of Volumes concerning the Output and USB outputs as well as the big button are causing a lot of ink to flow here, because the QC documentation is too light on this subject.
For Home Studio I connect Output 1/2 to my sound card, I no longer use USB! maybe I’m wrong ?

I mainly need to adjust the Output volumes of all Scenes/Sounds before rehearsals.
in order not to waste other musicos’ time, therefore with a “Reference Preset” which works well for the Output levels with also a DB Meter at a distance of 3 Meters for control.
I only move the output volume knob of the Stage Amplifier(s) and I note my 4 Output settings in DB which follow in the example below and I monitor the Red Clipping Zone:

1/ Rhythm during lead vocals “REFerence level in db”
2/ if Intro guitar Light Boost REF+3db
3/ Riff Bridge and chorus REF+4db
4/ Lead guitar out of the Mix REF+5 or 6 db for Van Halen

HERE IS MY FEATURE REQUEST: ADDITION OF VIEWS METERS Output L/R PERMANENT I THINK AT THE TOP OF THE QC SCREEN JUST DURING THE TIME OF MY OUTPUT SETTINGS OF THE SCENES,
MAY BE A MASK/DISPLAY BUTTON (I am aware that for QC Developers, the permanent display certainly impacts the CPUs)
OR IF THIS IS NOT POSSIBLE FOR SOME REASONS ? THEN DO IT ON A COMPUTER WITH CORTEX CONTROL
During my settings, the multiple navigations on the QC between the Meter Views and the Amp Pedals settings etc… it’s just useless for everyone. HAAaargh…!

If you’re talking bullshit, or if my method sucks, then don’t hesitate to give me a constructive criticism for QC aficionados.

Concerning the equal gains of my Guitars: Strat/Les Paul/Ibanez/Folk for those who are interested:
I use “the t.bone GigA Pro Pedal Set” from Thomann with 32 possible Guitar Profiles -10db to +20db, cable length etc…
very happy for my needs.

Neural DSP: You did a very good job, I don’t regret my purchase, I’m sure that the upcoming CorOs and Doc PDF updates will be Nirvana!

(Forgive me for my mistakes in your Language)

Rock Never Dies!

Patrick.

Hello, there is already a feature request for this with a decent number of votes.

1 Like

Oups !
Should I destroy my request or transfer it to the historical request? Sorry, I’m not used to this Forum yet.
thanks for your advices
Patrick

The mod here may close this request.

No worries! I will close this request post.