# Stereo or Dual Mono Capture Block **URL:** \ **Category:** Feature Requests\ **Tags:** quad-cortex\ **Created:** [January 16, 2026, 12:39am UTC](https://unity.neuraldsp.com/t/stereo-or-dual-mono-capture-block/20808 "2026-01-16T00:39:44Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![joshcarter](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/joshcarter/32/4782_2.png) [@joshcarter](https://unity.neuraldsp.com/u/joshcarter)\ **Post date:** [January 16, 2026, 12:39am UTC](https://unity.neuraldsp.com/t/stereo-or-dual-mono-capture-block/20808/1 "2026-01-16T00:39:44Z")
My request is a block that allows you to load two captures into it and control panning, similar to the Stereo IR loader but for Neural Captures. A great use case would be to load two amp captures, panned left and right, in a single block. This would allow the use of parallel paths before or after this block rather than utilising an entire row for a single amp. ---
**Author:** ![DiffractionCircuit](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/diffractioncircuit/32/3793_2.png) [@DiffractionCircuit](https://unity.neuraldsp.com/u/DiffractionCircuit)\ **Post date:** [January 16, 2026, 5:11am UTC](https://unity.neuraldsp.com/t/stereo-or-dual-mono-capture-block/20808/2 "2026-01-16T05:11:31Z")
Couple of old requests already exist for stereo captures. > [@Stereo capture](https://unity.neuraldsp.com/t/stereo-capture/4596): > > I’ve read somewhere but I wasn’t able to find again that in the future QC will be able to capture two mics at the same time. So, if this feature has been already posted please ignore this request, otherwise vote it… it will be a killer feature for a “cab in the room emulation” or to get a some stereo early reflection for the cab emulation! > [@Feature Request: Amps, cabs and captures in stereo (for stereo pre-effects)](https://unity.neuraldsp.com/t/feature-request-amps-cabs-and-captures-in-stereo-for-stereo-pre-effects/5853): > > I was testing the QC in a store today (still waiting for mine to arrive) and I noticed that when I put stereo effects (eg. ping-pong delay) before an amp (as I like to do), it gets summed to mono. I was trying to look for a way to switch the amp and cab to stereo, but it seems there isn’t one. To build that kind of a patch, I had to split the signal after the delay and use two amp modules on different rows. But this makes adjusting amp & cab settings a hassle, as you have to do everything twice… ---
**Author:** ![MP\_Mod](https://avatars.discourse-cdn.com/v4/letter/m/ccd318/32.png) [@MP\_Mod](https://unity.neuraldsp.com/u/MP_Mod)\ **Post date:** [January 16, 2026, 4:43pm UTC](https://unity.neuraldsp.com/t/stereo-or-dual-mono-capture-block/20808/3 "2026-01-16T16:43:36Z")
Please utilize the search function prior to submitting new requests. Thanks! ---
**Author:** ![MP\_Mod](https://avatars.discourse-cdn.com/v4/letter/m/ccd318/32.png) [@MP\_Mod](https://unity.neuraldsp.com/u/MP_Mod)\ **Post date:** [January 16, 2026, 4:43pm UTC](https://unity.neuraldsp.com/t/stereo-or-dual-mono-capture-block/20808/4 "2026-01-16T16:43:49Z")