# Send/Return

**URL:** <https://unity.neuraldsp.com/t/send-return/8228>\
**Category:** Quad Cortex\
**Created:** [September 23, 2022, 10:26am UTC](https://unity.neuraldsp.com/t/send-return/8228 "2022-09-23T10:26:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![martindavidson261170](https://avatars.discourse-cdn.com/v4/letter/m/838e76/32.png) [@martindavidson261170](https://unity.neuraldsp.com/u/martindavidson261170)\
**Post date:** [September 23, 2022, 10:26am UTC](https://unity.neuraldsp.com/t/send-return/8228/1 "2022-09-23T10:26:58Z")

</div>

For acoustic guitar i have been using a Grace Design Alix pre amp with the input socket going to the QC send/return to use EQ and reverb. The input block was set to return 1 and the output set to send 1. Was working fine. I have done nothing except apply the recent update and now i get no sound from the PA when trying to use the send/return. Did anything change in that update related to the send/return?

---

<div class="post-metadata">

**Author:** ![MP\_Mod](https://avatars.discourse-cdn.com/v4/letter/m/ccd318/32.png) [@MP\_Mod](https://unity.neuraldsp.com/u/MP_Mod)\
**Post date:** [September 23, 2022, 11:31am UTC](https://unity.neuraldsp.com/t/send-return/8228/2 "2022-09-23T11:31:27Z")

</div>

Hi @martindavidson261170 , sorry to hear you are having issues with your send/return etc.  
For future reference, the firmware release notes indicate what has been updated and can be found here:  
[https://neuraldsp.com/news/coros-1-4-1-is-now-available](https://neuraldsp.com/news/coros-1-4-1-is-now-available)

This past update was for general bug fixes and S/R wasn’t listed within the release notes therefore I would say no changes have been made in that area. I would check your cabling and splitter/mixer settings (if used) as that is the primary areas where problems are found. Also review the I/O page for settings that may have changed. I personally use my send/returns frequently and have not noticed any changes currently.

If you are unable to determine the cause of your issue, please email [support@neuraldsp.com](mailto:support@neuraldsp.com) and they can work with you to resolve your issues.
