# Scene Help

**URL:** <https://unity.neuraldsp.com/t/scene-help/15083>\
**Category:** Quad Cortex\
**Tags:** quad-cortex\
**Created:** [August 22, 2024, 6:59pm UTC](https://unity.neuraldsp.com/t/scene-help/15083 "2024-08-22T18:59:02Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![marcpro](https://avatars.discourse-cdn.com/v4/letter/m/8edcca/32.png) [@marcpro](https://unity.neuraldsp.com/u/marcpro)\
**Post date:** [August 22, 2024, 6:59pm UTC](https://unity.neuraldsp.com/t/scene-help/15083/1 "2024-08-22T18:59:02Z")

</div>

Hi Gang:

I am still learning this fantastic Quad Cortex. I downloaded a sound from the Cortex Cloud Zwreck 20, and I am trying to set up scenes. But for some reason, every time I make an adjustment and try to save it to a scene, it saves it for ALL. I open a stock preset like the Swiss Knife, and I can set up scenes, make changes, and save them to the scene. I am missing a step here with my new sound. Any thoughts? Please and thank you.

---

<div class="post-metadata">

**Author:** ![DiffractionCircuit](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/diffractioncircuit/32/3793_2.png) [@DiffractionCircuit](https://unity.neuraldsp.com/u/DiffractionCircuit)\
**Post date:** [August 22, 2024, 7:10pm UTC](https://unity.neuraldsp.com/t/scene-help/15083/2 "2024-08-22T19:10:14Z")

</div>

Check out Scene Bypass State Behavior in the Settings.

---

<div class="post-metadata">

**Author:** ![marcpro](https://avatars.discourse-cdn.com/v4/letter/m/8edcca/32.png) [@marcpro](https://unity.neuraldsp.com/u/marcpro)\
**Post date:** [August 22, 2024, 8:05pm UTC](https://unity.neuraldsp.com/t/scene-help/15083/3 "2024-08-22T20:05:40Z")

</div>

Hi Nick

Thank you for your response. That appears to be a global setting, which is set correctly or set to default. Strangely, this isn’t happening to all presets.

---

<div class="post-metadata">

**Author:** ![holba](https://avatars.discourse-cdn.com/v4/letter/h/ebca7d/32.png) [@holba](https://unity.neuraldsp.com/u/holba)\
**Post date:** [August 23, 2024, 12:57pm UTC](https://unity.neuraldsp.com/t/scene-help/15083/4 "2024-08-23T12:57:44Z")

</div>

You must assign the dedicated parameters to “Scene” as a precondition. Check the QC manual for that one - page 53.

---

<div class="post-metadata">

**Author:** ![xush](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/xush/32/5100_2.png) [@xush](https://unity.neuraldsp.com/u/xush)\
**Post date:** [August 23, 2024, 1:53pm UTC](https://unity.neuraldsp.com/t/scene-help/15083/5 "2024-08-23T13:53:04Z")

</div>

sounds like the opposite of what should be happening; a factory preset shouldn’t be editable unless you’re doing as ‘save as’ and creating a duplicate elsewhere.

User presets DL’d from the Cloud should be editable in all cases.  
Maybe you have a bug? Have you rebooted the unit several times since the last update? Have you tried Recovery Mode?

- Turn off the unit
- Disconnect all the cables
- Wait 30 seconds, connect only the PSU cable, and turn it on again
- On the loading/splash screen, press and hold the “A” and “H” stomps
- Select “Reset To Factory Default”
- Check if the problem persists