# Reamping with QC while monitoring

**URL:** <https://unity.neuraldsp.com/t/reamping-with-qc-while-monitoring/13673>\
**Category:** Quad Cortex\
**Created:** [March 18, 2024, 7:54am UTC](https://unity.neuraldsp.com/t/reamping-with-qc-while-monitoring/13673 "2024-03-18T07:54:02Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rabidshore](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/rabidshore/32/6085_2.png) [@Rabidshore](https://unity.neuraldsp.com/u/Rabidshore)\
**Post date:** [March 18, 2024, 7:54am UTC](https://unity.neuraldsp.com/t/reamping-with-qc-while-monitoring/13673/1 "2024-03-18T07:54:02Z")

</div>

Hi.

I have lots of DI tracks which is going to be reamped with my QC.  
But i cant seem to figure out how to route it so i can monitor it while to get the right sound. I work in Studio one 6 and use the Presonus Studio 1824c interface.  
If i use the QC with usb, then i cant hear it through my interface (ofc).  
And i could take the cables from my monitors, but everything is set up inside my table with racks.

Is there a “easily setup and tear down” way to reamp with the QC then? i have 0 experience with reamping so not quite sure how it’s normally done.

Could send the DI to the output on the back of the interface and put a TRS it into the input on the QC and then have a XLR from the output in the QC into the interface and record?

Any help is much appreciated