# Re-Amping

**URL:** <https://unity.neuraldsp.com/t/re-amping/20003>\
**Category:** Quad Cortex\
**Created:** [November 5, 2025, 8:40pm UTC](https://unity.neuraldsp.com/t/re-amping/20003 "2025-11-05T20:40:03Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![ivanlechev](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/ivanlechev/32/2345_2.png) [@ivanlechev](https://unity.neuraldsp.com/u/ivanlechev)\
**Post date:** [November 5, 2025, 8:40pm UTC](https://unity.neuraldsp.com/t/re-amping/20003/1 "2025-11-05T20:40:03Z")

</div>

Hello, has anyone used the Quad Cortex for reamping, i.e. sending a recorded track through it and returning back to the DAW? Is it possible and how to do it?

---

<div class="post-metadata">

**Author:** ![DiffractionCircuit](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/diffractioncircuit/32/3793_2.png) [@DiffractionCircuit](https://unity.neuraldsp.com/u/DiffractionCircuit)\
**Post date:** [November 5, 2025, 9:08pm UTC](https://unity.neuraldsp.com/t/re-amping/20003/2 "2025-11-05T21:08:39Z")

</div>

Yes, reamping is possible. See Section 9, “Computer Integration”, and specifically page 83, in the QC manual.

If you have more specific questions, post here.

---

<div class="post-metadata">

**Author:** ![RomeoKnight](https://avatars.discourse-cdn.com/v4/letter/r/ecae2f/32.png) [@RomeoKnight](https://unity.neuraldsp.com/u/RomeoKnight)\
**Post date:** [November 11, 2025, 10:29am UTC](https://unity.neuraldsp.com/t/re-amping/20003/3 "2025-11-11T10:29:17Z")

</div>

Sure, did it in a couple of instances, it’s pretty easy.  
But I use the standard analogue I/Os - are you referring to USB/audio interface functionality?

---

<div class="post-metadata">

**Author:** ![ivanlechev](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/ivanlechev/32/2345_2.png) [@ivanlechev](https://unity.neuraldsp.com/u/ivanlechev)\
**Post date:** [November 13, 2025, 8:10am UTC](https://unity.neuraldsp.com/t/re-amping/20003/4 "2025-11-13T08:10:04Z")

</div>

Yes, I would prefer the USB way. In the manual I read that direct signal from my guitar should appear on input 1(in multi out mode), but it doesn’t. Logic Pro on a Mac.

---

<div class="post-metadata">

**Author:** ![xush](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/xush/32/5100_2.png) [@xush](https://unity.neuraldsp.com/u/xush)\
**Post date:** [November 13, 2025, 5:09pm UTC](https://unity.neuraldsp.com/t/re-amping/20003/5 "2025-11-13T17:09:52Z")

</div>

In Logic, the QC’s Input 1 DI should appear on Channel 1, Input 2 DI on Channel 2 (if you have no other interfaces connected thru an aggregate device).

The DI signal level is extremely low, you may not see it moving the meters. Many use a gain plugin in Logic to boost the signal, but if you’re reamping in the DAW you can also increase the level in whatever other plugins you’re using.

---

<div class="post-metadata">

**Author:** ![ivanlechev](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/ivanlechev/32/2345_2.png) [@ivanlechev](https://unity.neuraldsp.com/u/ivanlechev)\
**Post date:** [November 13, 2025, 10:11pm UTC](https://unity.neuraldsp.com/t/re-amping/20003/6 "2025-11-13T22:11:33Z")

</div>

Oh, I see. Thank you very much, will give it a try tomorrow.