# Quad Cortex Pro Tools USB Setup

**URL:** https://unity.neuraldsp.com/t/quad-cortex-pro-tools-usb-setup/21938
**Category:** Quad Cortex
**Tags:** support
**Created:** [April 18, 2026, 1:37pm UTC](https://unity.neuraldsp.com/t/quad-cortex-pro-tools-usb-setup/21938 "2026-04-18T13:37:29Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![MichaelStray](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/michaelstray/32/10143_2.png) [@MichaelStray](https://unity.neuraldsp.com/u/MichaelStray)
#### Post date: [April 18, 2026, 1:37pm UTC](https://unity.neuraldsp.com/t/quad-cortex-pro-tools-usb-setup/21938/1 "2026-04-18T13:37:29Z")

</div>

Hey Community!

I have setup an aggregate device on my mac mini with the QC and my SSL2+ Audio Interface selected. I then selected the aggregate device in pro tools and made sure that the inputs and outputs match with the I/Os in the midi setup on my mac but I get no audio sent to my speakers. I can see signal coming to my audio track in pro tools from the USB cable but no matter what output I select, I don’t get sound - not even from the click track. Is there anything I am missing? Any help would be much appreciated!

---

<div class="post-metadata">

### Author: ![xush](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/xush/32/5100_2.png) [@xush](https://unity.neuraldsp.com/u/xush)
#### Post date: [April 18, 2026, 2:16pm UTC](https://unity.neuraldsp.com/t/quad-cortex-pro-tools-usb-setup/21938/2 "2026-04-18T14:16:51Z")

</div>

What are the speakers plugged into?

Many of us aggregators use a monitor mixer for flexibility and not having to reroute cables. I haven’t had to troubleshoot it since I set it up so I’ll have to do some digging to recall the options.

---

<div class="post-metadata">

### Author: ![MichaelStray](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/michaelstray/32/10143_2.png) [@MichaelStray](https://unity.neuraldsp.com/u/MichaelStray)
#### Post date: [April 18, 2026, 4:03pm UTC](https://unity.neuraldsp.com/t/quad-cortex-pro-tools-usb-setup/21938/3 "2026-04-18T16:03:07Z")

</div>

My studio monitors are plugged into the SSL2+ Audio Interface. I’ve attached my audio setup within Mac. I get audio coming into the audio channel in Pro Tools but no matter what output I select on the channel, I don’t get any audio which means that some routing has to be wrong in Pro Tools I/O. I just can’t seem to figure out what it is…

 ![Screenshot 2026-04-18 at 18.01.19](https://us1.discourse-cdn.com/flex020/uploads/neuraldsp/original/2X/c/cf4596bc6e3ca18596440b692716a88f1dfc5612.png)
