# Phase switch on FX loop

**URL:** <https://unity.neuraldsp.com/t/phase-switch-on-fx-loop/11585>\
**Category:** Feature Requests\
**Created:** [July 31, 2023, 9:33am UTC](https://unity.neuraldsp.com/t/phase-switch-on-fx-loop/11585 "2023-07-31T09:33:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![SpinalTap](https://avatars.discourse-cdn.com/v4/letter/s/ea5d25/32.png) [@SpinalTap](https://unity.neuraldsp.com/u/SpinalTap)\
**Post date:** [July 31, 2023, 9:33am UTC](https://unity.neuraldsp.com/t/phase-switch-on-fx-loop/11585/1 "2023-07-31T09:33:10Z")

</div>

Quick one - FX loop needs a phase switch, please!

I can’t use ‘Mix’ to blend the dry signal around my Bogner Harlow in the loop without it killing my signal. Can be fixed with a splitter but it’s a waste of a row, and if I then bypass the FX loop; phase is wrong again and it goes silent.

---

<div class="post-metadata">

**Author:** ![Topherbass](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/topherbass/32/6188_2.png) [@Topherbass](https://unity.neuraldsp.com/u/Topherbass)\
**Post date:** [August 17, 2023, 3:06pm UTC](https://unity.neuraldsp.com/t/phase-switch-on-fx-loop/11585/2 "2023-08-17T15:06:24Z")

</div>

1 block solution

Utility-\> gain → phase switch

I find my self using this frequently with parallel inputs. Wet (h90) / dry

---

<div class="post-metadata">

**Author:** ![SpinalTap](https://avatars.discourse-cdn.com/v4/letter/s/ea5d25/32.png) [@SpinalTap](https://unity.neuraldsp.com/u/SpinalTap)\
**Post date:** [August 17, 2023, 3:24pm UTC](https://unity.neuraldsp.com/t/phase-switch-on-fx-loop/11585/3 "2023-08-17T15:24:15Z")

</div>

You can’t use that ‘inside’ the FX loop block, though, to make use of the dry blend within that block.

That would help with my splitter setup, but it’s still far from ideal wasting a 2nd row to get a dry signal around a compressor first thing in my chain…