# Neural capture problems

**URL:** <https://unity.neuraldsp.com/t/neural-capture-problems/23327>\
**Category:** Nano Cortex\
**Created:** [September 12, 2026, 7:21pm UTC](https://unity.neuraldsp.com/t/neural-capture-problems/23327 "2026-09-12T19:21:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JohnBurrett](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@JohnBurrett](https://unity.neuraldsp.com/u/JohnBurrett)\
**Post date:** [September 12, 2026, 7:21pm UTC](https://unity.neuraldsp.com/t/neural-capture-problems/23327/1 "2026-09-12T19:21:07Z")

</div>

When I connect up my gear to make a neural capture of my amp, the tones that it makes are extremely loud, no matter how I set the amp or the input to the nano. I am using a condenser mic, through a preamp (for phantom power) to go into the nano. No matter how low I set the preamp inputs and outputs, the same extremely loud tones play. It’s way too loud to use. Can anyone suggest what the problem and fix would be, please?

---

<div class="post-metadata">

**Author:** ![h2loh](https://avatars.discourse-cdn.com/v4/letter/h/fbc32d/32.png) [@h2loh](https://unity.neuraldsp.com/u/h2loh)\
**Post date:** [September 12, 2026, 9:28pm UTC](https://unity.neuraldsp.com/t/neural-capture-problems/23327/2 "2026-09-12T21:28:33Z")

</div>

Can’t you just turn down the capture block?

---

<div class="post-metadata">

**Author:** ![h2loh](https://avatars.discourse-cdn.com/v4/letter/h/fbc32d/32.png) [@h2loh](https://unity.neuraldsp.com/u/h2loh)\
**Post date:** [September 13, 2026, 2:06am UTC](https://unity.neuraldsp.com/t/neural-capture-problems/23327/3 "2026-09-13T02:06:06Z")

</div>

I think it is supposed to be loud, it should be as loud as the amp would be played at, just believe.