# NC connection to iPad for recording **URL:** \ **Category:** Nano Cortex\ **Created:** [March 12, 2025, 2:44am UTC](https://unity.neuraldsp.com/t/nc-connection-to-ipad-for-recording/17551 "2025-03-12T02:44:55Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![AerialEnvoy](https://avatars.discourse-cdn.com/v4/letter/a/4491bb/32.png) [@AerialEnvoy](https://unity.neuraldsp.com/u/AerialEnvoy)\ **Post date:** [March 12, 2025, 2:44am UTC](https://unity.neuraldsp.com/t/nc-connection-to-ipad-for-recording/17551/1 "2025-03-12T02:44:55Z")
I’m using a UsB c Hub to connect the NC as an audio interface to an iPad (M1) Pro and Logic Pro 2 DAW. The buffer is set to 256 and there are clicks, pops and drop outs. It doesn’t seem to matter if I set the NC to record DI or FX stereo ( as the NC manual says to do). It is marginally better if I just connect NC direct through the suplied USB C cable but still causes issues. Any advice is greatly appreciated. Better USB C Cable? Higher Quality USB C hub? Anyone else experienced this problem? ---
**Author:** ![AerialEnvoy](https://avatars.discourse-cdn.com/v4/letter/a/4491bb/32.png) [@AerialEnvoy](https://unity.neuraldsp.com/u/AerialEnvoy)\ **Post date:** [March 14, 2025, 9:32pm UTC](https://unity.neuraldsp.com/t/nc-connection-to-ipad-for-recording/17551/2 "2025-03-14T21:32:30Z")
SOLVED. Problem was due to trying to run a wifi enabled pointing device connected to the USB C hub through a dongle. Switched to BT only pointing device and no un-desirable noise! ---
**Author:** ![MP\_Mod](https://avatars.discourse-cdn.com/v4/letter/m/ccd318/32.png) [@MP\_Mod](https://unity.neuraldsp.com/u/MP_Mod)\ **Post date:** [June 4, 2025, 3:20pm UTC](https://unity.neuraldsp.com/t/nc-connection-to-ipad-for-recording/17551/3 "2025-06-04T15:20:29Z")
Closed on June 4, 2025, 3:20pm UTC