# Nanocortex volume **URL:** \ **Category:** Nano Cortex\ **Created:** [April 20, 2025, 10:58pm UTC](https://unity.neuraldsp.com/t/nanocortex-volume/17919 "2025-04-20T22:58:56Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Oscarmurray](https://avatars.discourse-cdn.com/v4/letter/o/ed655f/32.png) [@Oscarmurray](https://unity.neuraldsp.com/u/Oscarmurray)\ **Post date:** [April 20, 2025, 10:58pm UTC](https://unity.neuraldsp.com/t/nanocortex-volume/17919/1 "2025-04-20T22:58:56Z")
Hi everyone, I just got the nanocortex and very happy so far but I think that the overall volume ( level pot) is in general very low… Someone has the same kind of issue ? Is that normal ? This is happening with the factory presets and captures … This is why I think it’s maybe not normal. I could rise the volume of the capture or the IR but I m just not Shure if that would apply some gain when is connected to the front house in a gig situation. I will appreciate some comments. Thanks !! ---
**Author:** ![Oscarmurray](https://avatars.discourse-cdn.com/v4/letter/o/ed655f/32.png) [@Oscarmurray](https://unity.neuraldsp.com/u/Oscarmurray)\ **Post date:** [April 22, 2025, 2:48pm UTC](https://unity.neuraldsp.com/t/nanocortex-volume/17919/2 "2025-04-22T14:48:59Z")
I will update myself this question I also discovered that the input level from the DI signal using the NC as recording interface is very low. There is an option to set the input level? ---
**Author:** ![Ardnega](https://avatars.discourse-cdn.com/v4/letter/a/b487fb/32.png) [@Ardnega](https://unity.neuraldsp.com/u/Ardnega)\ **Post date:** [December 5, 2025, 6:40pm UTC](https://unity.neuraldsp.com/t/nanocortex-volume/17919/3 "2025-12-05T18:40:40Z")
I was experiencing the same. ![Screenshot 2025-12-06 at 2.35.19 AM](https://us1.discourse-cdn.com/flex020/uploads/neuraldsp/original/2X/0/0ac8e2be6ea37556e7d1e2ee1056ce3c063f5a37.png) I could not find any proper solution listed but finally found a solution. After connecting Nano to computer before opening your DAW go to System Settings… navigate to Sound. Look for the Output & Input and Click on Input - Nano Cortex - Increase the Input Volume. ![Screenshot 2025-12-06 at 2.41.21 AM](https://us1.discourse-cdn.com/flex020/uploads/neuraldsp/original/2X/6/6e961ec5f5b66e6328ce2e30bcf6ac534e938800.png) This looks much better. ---
**Author:** ![Oscarmurray](https://avatars.discourse-cdn.com/v4/letter/o/ed655f/32.png) [@Oscarmurray](https://unity.neuraldsp.com/u/Oscarmurray)\ **Post date:** [December 6, 2025, 11:32am UTC](https://unity.neuraldsp.com/t/nanocortex-volume/17919/4 "2025-12-06T11:32:05Z")
I will try that, in general I must say that with the plugins there is no problem because we can rise the input level but to edit it can get tricky not seeing the signal properly