# Capture Kemper on Quad Cortex

**URL:** <https://unity.neuraldsp.com/t/capture-kemper-on-quad-cortex/4920>\
**Category:** Quad Cortex\
**Created:** [June 11, 2021, 5:06pm UTC](https://unity.neuraldsp.com/t/capture-kemper-on-quad-cortex/4920 "2021-06-11T17:06:16Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Satoshi](https://avatars.discourse-cdn.com/v4/letter/s/838e76/32.png) [@Satoshi](https://unity.neuraldsp.com/u/Satoshi)\
**Post date:** [June 11, 2021, 5:06pm UTC](https://unity.neuraldsp.com/t/capture-kemper-on-quad-cortex/4920/1 "2021-06-11T17:06:16Z")

</div>

I ran Neural Capture to use the Kemper Rig in QC.  
As described in the manual, I set the Inst Level to about -10dB and adjusted the IN 1 Level to about -10dB.  
Since I was using a bass, I set the Inst Level knob to about +15dB.  
At this time, I did not clip the sound coming from Kemper.  
For the output from the Kemper, I set the Main Out to -16dB and connected it to the QC via XLR.

When I performed Start Capture in this state, the Neural Capture sound was distorted considerably.  
When I lower Inst Level and In 1 Level, the sound of Neural Capture becomes less bass compared to Kemper, and the sound is not enough.

Is there anything I can do to make it better?
