# Anyone using v2.1.1?

**URL:** <https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883>\
**Category:** Quad Cortex\
**Created:** [September 9, 2023, 4:50pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883 "2023-09-09T16:50:41Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![PickinPete](https://avatars.discourse-cdn.com/v4/letter/p/aeb1de/32.png) [@PickinPete](https://unity.neuraldsp.com/u/PickinPete)\
**Post date:** [September 9, 2023, 4:50pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/1 "2023-09-09T16:50:41Z")

</div>

Other than andamado997’s post, I’m not seeing anything about v2.1.1. Has anyone else updated? If so, are you finding the fixes actually fixed the listed issues on your QC? Has anyone else discovered any new bugs? I’m debating on whether to wait until our band is through this batch of gigs or whether 2.1.1 is stable enough to update now. Any thoughts? Sorry to use you as guinea pigs.

---

<div class="post-metadata">

**Author:** ![Pepe](https://avatars.discourse-cdn.com/v4/letter/p/4da419/32.png) [@Pepe](https://unity.neuraldsp.com/u/Pepe)\
**Post date:** [September 9, 2023, 5:07pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/2 "2023-09-09T17:07:30Z")

</div>

2.1.1 no problems for me

---

<div class="post-metadata">

**Author:** ![747](https://avatars.discourse-cdn.com/v4/letter/7/e99b99/32.png) [@747](https://unity.neuraldsp.com/u/747)\
**Post date:** [September 9, 2023, 5:22pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/3 "2023-09-09T17:22:12Z")

</div>

I did experience some bugs on CorOS 2.1.0 but none since updating to 2.1.1

---

<div class="post-metadata">

**Author:** ![PickinPete](https://avatars.discourse-cdn.com/v4/letter/p/aeb1de/32.png) [@PickinPete](https://unity.neuraldsp.com/u/PickinPete)\
**Post date:** [September 9, 2023, 7:03pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/4 "2023-09-09T19:03:16Z")

</div>

Good to hear that it’s been stable for you guys. Anyone else?

---

<div class="post-metadata">

**Author:** ![andamado997](https://avatars.discourse-cdn.com/v4/letter/a/779978/32.png) [@andamado997](https://unity.neuraldsp.com/u/andamado997)\
**Post date:** [September 9, 2023, 8:08pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/5 "2023-09-09T20:08:25Z")

</div>

If you were in the middle of doing gigs/tour, I would hold off until you are through so that way nothing gets affected if there does happen to be issues with the newest update. As you saw from my earlier post I’m waiting to see if anyone else is having the same issues I am in regards to some of the delays getting off sync to the BPM between seeing changes. Other than that, I haven’t experienced anything else out of the ordinary.

---

<div class="post-metadata">

**Author:** ![Powerplant](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/powerplant/32/1819_2.png) [@Powerplant](https://unity.neuraldsp.com/u/Powerplant)\
**Post date:** [September 9, 2023, 8:16pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/6 "2023-09-09T20:16:05Z")

</div>

Ok for me  
Updated the first day

---

<div class="post-metadata">

**Author:** ![DavidRSTV](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/davidrstv/32/4347_2.png) [@DavidRSTV](https://unity.neuraldsp.com/u/DavidRSTV)\
**Post date:** [September 9, 2023, 9:16pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/7 "2023-09-09T21:16:22Z")

</div>

Stable for me. But I do not use any BPM related effects… so I can not say anything about the bug others posted about earlier.

---

<div class="post-metadata">

**Author:** ![electricblank](https://avatars.discourse-cdn.com/v4/letter/e/ea666f/32.png) [@electricblank](https://unity.neuraldsp.com/u/electricblank)\
**Post date:** [September 9, 2023, 10:49pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/8 "2023-09-09T22:49:24Z")

</div>

only problem i’ve come across is the brit UBL factory preset loading but completely muted (not set to be muted) could be an effect it loads I dunno but switching to another preset then back can fix it.

---

<div class="post-metadata">

**Author:** ![PickinPete](https://avatars.discourse-cdn.com/v4/letter/p/aeb1de/32.png) [@PickinPete](https://unity.neuraldsp.com/u/PickinPete)\
**Post date:** [September 10, 2023, 2:37am UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/9 "2023-09-10T02:37:01Z")

</div>

That’s an oddly specific bug.

---

<div class="post-metadata">

**Author:** ![PickinPete](https://avatars.discourse-cdn.com/v4/letter/p/aeb1de/32.png) [@PickinPete](https://unity.neuraldsp.com/u/PickinPete)\
**Post date:** [September 10, 2023, 2:39am UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/10 "2023-09-10T02:39:02Z")

</div>

I do use tap tempo for delays so I’d like to make sure that function is right before updating.

---

<div class="post-metadata">

**Author:** ![PickinPete](https://avatars.discourse-cdn.com/v4/letter/p/aeb1de/32.png) [@PickinPete](https://unity.neuraldsp.com/u/PickinPete)\
**Post date:** [September 10, 2023, 2:47pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/11 "2023-09-10T14:47:18Z")

</div>

Guess I’ll wait a bit longer before updating. Thanks for sharing your experiences, ya’ll.

---

<div class="post-metadata">

**Author:** ![manrik](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/manrik/32/4231_2.png) [@manrik](https://unity.neuraldsp.com/u/manrik)\
**Post date:** [September 10, 2023, 4:34pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/12 "2023-09-10T16:34:18Z")

</div>

same delay sync issue as @andamado997

---

<div class="post-metadata">

**Author:** ![jamtagg](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@jamtagg](https://unity.neuraldsp.com/u/jamtagg)\
**Post date:** [September 11, 2023, 2:23am UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/13 "2023-09-11T02:23:49Z")

</div>

SSL compressor gain reduction meter is going wacky. Other than that I’ve found no other bugs so far. They did fix a prior bug I discovered with exp pedal problems relating to reverse delay feedback setting right away, so that was cool! Go NDSP customer service and developers! Yay!

---

<div class="post-metadata">

**Author:** ![PickinPete](https://avatars.discourse-cdn.com/v4/letter/p/aeb1de/32.png) [@PickinPete](https://unity.neuraldsp.com/u/PickinPete)\
**Post date:** [September 11, 2023, 3:25am UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/14 "2023-09-11T03:25:28Z")

</div>

What’s the comp meter doing that’s so wacky? Yes, glad to see that they’re cleaning up some bugs. I’m sure it’s like playing Whack-A-Mole. Fix five bugs and another two pop up. Fortunately, my QC has been quite solid, no serious bugs.

---

<div class="post-metadata">

**Author:** ![VanHeGen](https://sea2.discourse-cdn.com/flex020/user_avatar/unity.neuraldsp.com/vanhegen/32/3289_2.png) [@VanHeGen](https://unity.neuraldsp.com/u/VanHeGen)\
**Post date:** [September 11, 2023, 9:31am UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/15 "2023-09-11T09:31:28Z")

</div>

If you are using the Victory Kraken… Squid amps in your presets, the focus switch has been reversed. I have a preset that is using both focused and not focused, so i made a note about where it was used in which position before upgrading (and I of course made backup). I then just switched it back to focus/not per how I had originally planned.  
Otherwise the upgrade was smooth.

I would not upgrade in the middle of a gig/tour.

---

<div class="post-metadata">

**Author:** ![PickinPete](https://avatars.discourse-cdn.com/v4/letter/p/aeb1de/32.png) [@PickinPete](https://unity.neuraldsp.com/u/PickinPete)\
**Post date:** [September 11, 2023, 1:48pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/16 "2023-09-11T13:48:51Z")

</div>

Thanks for the heads-up.

---

<div class="post-metadata">

**Author:** ![rschieder](https://avatars.discourse-cdn.com/v4/letter/r/dbc845/32.png) [@rschieder](https://unity.neuraldsp.com/u/rschieder)\
**Post date:** [September 11, 2023, 11:36pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/17 "2023-09-11T23:36:04Z")

</div>

No new problems, seem to fix some of the varying volume issues I had in 2.1.0. So I would definitely load 2.1.1.

---

<div class="post-metadata">

**Author:** ![PickinPete](https://avatars.discourse-cdn.com/v4/letter/p/aeb1de/32.png) [@PickinPete](https://unity.neuraldsp.com/u/PickinPete)\
**Post date:** [September 12, 2023, 2:04pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/18 "2023-09-12T14:04:56Z")

</div>

We have another show on Saturday, then a few weeks off. I think that will be a good time to try v2.1.1. Thanks, everyone, for your input.

---

<div class="post-metadata">

**Author:** ![legzalez](https://avatars.discourse-cdn.com/v4/letter/l/41988e/32.png) [@legzalez](https://unity.neuraldsp.com/u/legzalez)\
**Post date:** [September 13, 2023, 2:08am UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/19 "2023-09-13T02:08:06Z")

</div>

All good here, no issues at all.

---

<div class="post-metadata">

**Author:** ![ThomasLarsson](https://avatars.discourse-cdn.com/v4/letter/t/7cd45c/32.png) [@ThomasLarsson](https://unity.neuraldsp.com/u/ThomasLarsson)\
**Post date:** [September 13, 2023, 7:44pm UTC](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883/20 "2023-09-13T19:44:14Z")

</div>

A friend of mine have issue with the output 2 being louder than output 1. But my balance is fine,

[Next page](https://unity.neuraldsp.com/t/anyone-using-v2-1-1/11883.md?page=2)
